USING YOUR ICE MAKER 11
How to obtain the ice-cube
Ice scoop position
1. Before we start making ice, please make sure the water drain cap has been
inserted into the appliance; otherwise it will not work properly.
2. Press “Ice/Clean” button , ring indicator light flashes white，it begin to work,
press this button again, it will stop making ice.
3. For the first time, or if the appliance has not been used for a long time, it is
recommended to clean this appliance before you start to make ice.
4. In the process of making ice, if the "Add Water" indicator light is on, and the
machine stops working, it needs adding water. After adding water, please restart
the machine; otherwise, it needs waiting for a long time and then automatically
start making ice again. When the ice making machine is restarted, the compressor
will have a waiting time of 3 minutes.
5. When the machine is full of ice, it will automatically stop working. The "Ice Full"
indicator light will be on, and the ring indicator light will be white. After the ice
is removed, the machine starts working automatically.
Put the scoop on the top back cover.
Ice scoop
Ice scoop holder
EN
To Next Page