To Next PageTo Next PageWhy is my Frigidaire Ice Maker “Add Water” light on?
The “Add Water” indicator might be on due to several reasons: * Lack of water: Stop the ice maker, add water, and then press the “ICE/ CLEAN” button to restart it. * The internal water tank baffle isn't correctly installed: Reinstall the baffle. * Water pump failure: Have a qualified technician check it.
What to do if my Frigidaire Ice Maker is leaking water?
If your ice maker is leaking water: * Ensure the drain plug is correctly in place. * If leakage continues, have a qualified technician check the pipe joints or the seal, as they may be loose or have reached their service life.
What to do if the Frigidaire EFIC255-NAVY is making ice too slowly?
If your Frigidaire ice maker is making ice too slowly with the Power and ICE icon flashing, it could be due to several reasons: * The ambient or water temperature is too high: Ensure the ice maker operates below 90°F and use colder water. * There is a problem with the refrigeration system, such as refrigerant liquid leakage, a broken cover motor, a blocked pipe in the cooling system, or a blocked hot air outlet: Ensure the hot air outlet has at least 15 cm of ventilation. If the issue persists, have a qualified technician check it. Restart the ice making program by pressing the ICE button to power off the unit, then press the ICE button again. The water temperature should be between 44.6°F -89.6°F.
What to do if the Frigidaire Ice Maker shows “Ice-Full” but there is no ice?
If the “Ice-Full” indicator is on, but there's no ice, try these steps: * Remove any obstructions inside the ice maker. * Clean the inside wall of the ice storage. Alternatively, press the “ICE” button for 5 seconds to make it work for 80 minutes.
General| Brand | Frigidaire |
|---|---|
| Model | EFIC255-NAVY |
| Ice Shape | Bullet |
| Power Consumption | 120W |
| Color | Navy |
| Control Type | Electronic |
| Type | Portable Ice Maker |
| Ice Size Options | Small, Large |
| Warranty | 1 year limited |
Key safety precautions regarding flammable liquids, moving parts, and carton handling.
Requirements for grounded outlets and precautions against electric shock.
Instructions for initiating ice making, monitoring water levels, and restarting.
Solutions for when the 'Add Water' indicator is lit.
Solutions for when the 'Ice-Full' indicator is lit, including empty storage.
Troubleshooting steps for flashing power and ice indicator lights.
Causes and solutions for the ice maker producing ice too slowly.
Diagnosing and fixing issues related to water leaks from the unit.
