2.
3.
Installing your appliance
WARNING: Keep flammable materials and vapors such as gasoline away
from the freezer.
•
•
•
•
Place your appliance in a well-ventilated area on a floor that is strong enough
to support it when fully loaded. To level your appliance, adjust the leg at the
front of the appliance.
To ensure proper ventilation for your freezer, leave not less that 12" of space
at the top and 4" on both sides and the back.
If you are installing the freezer next to a fixed wall, leave sufficient space
on the hinge side to allow for the door to swing open at least 1200
Locate the appliance away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight can affect the freezer's coating and
heat sources can increase electrical consumption. Extremely cold ambient
temperatures may also cause the appliance to perform improperly.
Avoid locating the appliance in moist areas. Too much moisture in the air can
promote rusting and will cause frost to form quickly on the evaporator,
requiring more frequent defrosting of the appliance.
Never place any weight on the electrical cord.
Reversing the door swing
This appliance has the capability of the door opening from either the left or right side. The unit
is delivered to you with the door opening from the left side.
The following freezer pictures are for your reference only.
Note:
Unplug the freezer from its electrical outlet.
Empty everything in the freezer, including the drawers, food, etc.
All parts removed must be saved to reinstall the door.
To Next Page
Loading...
