Before Setting Oven
Controls
Oven Vent Location
The oven is vented at the upper control panel grille. When the oven ison, warm
air is released through the vent. This venting isnecessary for proper air circulation
in the oven and good baking results. DO NOT block the vent. Doing so may cause
cooking failures, fire or damage to the wall oven.
Arranging Oven Racks
ALWAYSARRANGEOVENRACKSWHEN THEOVEN ISCOOL (PRIORTO OPERATING
THE OVEN). Always use oven mitts when using the oven.
To remove an oven rack, pull the
rack forward until it stops. Lift up front
of rack and slide out. To replace an
oven rack, fit the rackontothe guides
on the oven walls. Tilt the front of the
rack upward and slide the rack back
into place.
i
To bake on one rack, place the
rack at position 3 or 4. To bake
on two racks, place the racks at
positions 1 and 3.
The interior of a convection oven isshown in the above illustrations. As many as3
racks may be supplied with convection models and 2 racks for other models.
To Next Page
Loading...
