10
OPERATING INSTRUCTIONS
10 place settings standard loading
pattern.
Upper Rack
The UPPER RACK option can be used to
wash a wide assortment of items when
you don’t have a full load. Also, when the
upper rack fills up with glasses and the
lower rack is still empty, you don’t have to
wait anymore for clean glasses.
STEMWARE HOLDER/CUPSHELF not
available on all models.
Features and appearance of racks and
silverware basket may vary from your
model.
The lower rack is best for plates, saucers,
bowls, and cookware. Large items should
be placed along the edge so they do not
block the spray arm rotation. For best
results, place bowls, casseroles, and sauce
pans with soiled surface facing down or
toward the center. Tilt slightly for better
drainage.
Make sure tall items do not block spray
arm rotation.
Be sure pan handles do not protrude
through the bottom of the rack and block
the spray arm rotation.
Loading the Bottom Rack
Place the clips of the cup shelf over the
horizontal rack wires and push down to
attach the cup shelf onto the second wire
of the upper rack.
To Next Page
Loading...
Need help?
General
