Olnstall the Anti-tip MountingScrews
Thewallovencantip whenthedoor
isopen.Theanti-tipmountingscrewssupplied
with thewall ovenmustbeinstalledto prevent
tippingof thewall ovenandinjuryto persons.
A.Themountingholesinthesidetrimsmaybeused
asatemplateto locatetheappliancemountingscrew
holes(seefigure6).
B.Usethetwoscrewssuppliedto fixtheapplianceto
thecabinet.
Anti-TipMountingHoles
Figure6
!
@
Install the Bottom Trim
Placethe top of the bottom trim over the side trim
tabs on each side of the oven below the oven door
and fix it using the 2 screws supplied in the mounting
holes located on each side trim below the oven frame
(see Figure 7).
Screws
-- Bottom Trim
Figure 7
6
To Next Page
Loading...
