CAUTION
CAUTION
SURFACE LIGHT REPLACEMENT
20
CLEANING AND CARE
Disconnect the power cord or leave the door open to deactivate the oven
during cleaning. Disconnect the power cord before replacing filters and lights.
Front
Rear
Surface lights
Ventilation filters
Tab
To avoid risk of person al injury or pro perty
damage, do not operate oven hood without
filters properly in place.
To avoid risk of personal injury or property
damage, wear gloves when replacing the light
bulbs.
CLEANING THE EXHAUST FILTERS
The oven ventilation exhaust filters should be
removed and cleaned often; generally at least once
every month.
Vent exhaust filter part number 5304478913
To order parts call 800-599-7569
• To remove the exhaust ventilation filters, slide
the filter to the rear. Then pull filter downward
and push to the other side. The filter will drop
out. Repeat for the 2nd filter.
• To reinstall the exhaust ventilation filter, slide it
into the side slot, then push up and toward oven
to lock.
Reinstall the 2nd filter using the same
procedure.
• Unplug the microwave oven or turn off power at
the main circuit breaker.
• Remove the LED light cover mounting screw
under the microwave.
• Remove the LED light mounting screw.
• Soak the ventilation filters in hot water using a
mild detergent. Rinse well and shake to dry or
wash in a dishwasher. Do not use ammonia. The
aluminum on the filter will corrode and darken.
To Next Page
Loading...
