17
CARE AND CLEANING
Keep your appliance clean to prevent odor build-up. Wipe up any spills immediately and clean
at least twice a year. Never use metallic scouring pads, brushes, abrasive cleaners or strong
alkaline solutions on any surface. Do not wash any removable parts in a dishwasher. Always
unplug the electrical power.
CAUTION
• When moving the unit, pull straight out. Do not shift the appliance from side to
side as this may tear or gouge the oor covering.
• Damp objects stick to cold metal surfaces. Do not touch interior metal surfaces
with wet or damp hands.
Vacation and Moving Tips
Short Vacations:
• Leave the unit operating during vacations of less than three weeks.
Long Vacations:
If the appliance will not be used for
several months:
• Remove all food and unplug the power cord.
• Clean and dry the interior thoroughly.
• Leave the door open slightly, blocking it open if necessary, to prevent odor and mold growth.
Moving: When moving the unit, follow these guidelines to prevent damage:
• Disconnect the power cord plug from the wall outlet.
• Remove foods, then defrost, and clean
the appliance.
• Secure all loose items such as base panel, baskets, and shelves by taping them securely in
place to prevent damage.
• In the moving vehicle, secure unit in an upright position to prevent movement. Also protect
outside of the appliance with a blanket, or similar item.
NOTE
• Turning the temperature control to “OFF” (See ELECTRONIC CONTROL section) turns
off the compressor, but does not disconnect electrical power to the lights or other electrical
components. Unplug the unit or switch the breaker that supplies power to the unit to the
off position.
• Do not use razor blades or other sharp instruments which can scratch the appliance surface
when removing adhesive labels. Any glue left from tape or labels can be removed with a
mixture of warm water and mild detergent, or, touch the glue residue with the sticky side
of tape you have already removed. Do not remove the serial plate.
To Next Page
Loading...
