8
°F
Setting the PRO-SELECT™ Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit will run
continuously for the rst several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the appliance. Temperature is factory
preset to provide satisfactory food storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP () key for warmer temperature and DOWN
() key for colder temperature on the control panel. Allow several hours for the temperature
to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and 10°F
(-12°C). By pressing the TEMP MODE key, the temperature display will toggle between °F and °C.
DOOR REMOVAL
If door must be removed:
• Unplug the unit or switch the breaker that
supplies power to the unit to the
off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the
top hinge from the cabinet.
• Remove the two 3/8” hex head bolts
from the top hinge with a 3/8” wrench or
socket.
• Lift the door upwards and pull up and away
from the cabinet until free of the bottom
hinge pin mounted on the front of the
cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
CAUTION
Doors are heavy. Two people are
recommended to remove or replace the door
assembly from the cabinet.
ELECTRONIC CONTROL
Hinge Cover
To Next Page
Loading...
