EasyManuals Logo

Frigidaire FPRU19F8RF User Manual

Frigidaire FPRU19F8RF
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
BEFORE YOU CALL
PROBLEM CAUSE CORRECTION
APPLIANCE OPERATION
Appliance does
not run.
Appliance is plugged
into a circuit that has a
ground fault interrupt.
Temperature Control is in
the OFF position.
Appliance may not be
plugged in or plug is loose.
House fuse blown or
tripped circuit breaker.
Power outage.
Use another circuit. If you are unsure
about the outlet, have it checked by a
certied technician.
See ELECTRONIC CONTROL section.
Ensure plug is tightly pushed into outlet.
Check/replace fuse with a 15-amp time-
delay fuse. Reset circuit breaker.
Check house lights. Call local electric
company.
Appliance runs
too much or too
long.
Room or outside weather
is hot.
Appliance has recently
been disconnected for a
period of time.
Large amounts of warm
or hot food have been
stored recently.
Door is opened too fre-
quently or too long.
Door may be slightly open.
Temperature control is
set too low.
Gaskets are dirty, worn,
cracked, or poorly tted.
It’s normal for the appliance to work lon-
ger under these conditions.
It takes 24 hours for the appliance to cool
down completely.
Warm food will cause appliance to run
more until the desired temperature is
reached.
Warm air entering the appliance causes it
to run more. Open door less often.
See “DOOR PROBLEMS”.
Turn control knob to a warmer setting. Al-
low several hours for the temperature
to stabilize.
Clean or change gasket. Leaks in door seal
will cause appliance to run longer in order
to maintain desired temperatures.
APPLIANCE TEMPERATURES
Interior appli-
ance tempera-
ture is too cold.
Temperature control is
set too low.
Set control to a warmer setting. Allow sev-
eral hours for temperature to stabilize.
Temperature
inside appliance
is too warm.
Temperature control is set
too warm.
Door is opened too fre-
quently or too long.
Door may not be
seating properly.
Large amount of warm
or hot food has been
stored recently.
Appliance has recently
been disconnected for a
period of time.
Turn control to a colder setting. Allow several
hours for temperature to stabilize.
Warm air enters the appliance every time
the door is opened. Open door less often.
See “DOOR PROBLEMS”.
Wait until the appliance has had a chance
to reach its selected temperature.
Appliance requires 24 hours to cool
down completely.
“LO” is
displayed on
control.
Control has been locked. Press the CONTROL LOCK key for three
seconds to unlock.
Visit our web site at
www.frigidaire.com.
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
Before calling for service, review this list. It may save you time and expense. This list includes com-
mon occurrences that are not the result of defective workmanship or materials in this appliance.

Other manuals for Frigidaire FPRU19F8RF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frigidaire FPRU19F8RF and is the answer not in the manual?

Frigidaire FPRU19F8RF Specifications

General IconGeneral
Child lockYes
Door hingeRight
Control typeButtons
Product colorGrey, Stainless steel
Housing materialStainless steel
Reversible doorsNo
Appliance placementFreestanding
Fridge door balconies7
Number of vegetable drawers1
Fridge number of shelves/baskets3
Noise level- dB
CertificationStar-K, CSA
Climate class-
Fridge net capacity526 L
Fridge gross capacity538 L
Lamp typeLED
Cord length1.8 m
Current20 A
Connected load- W
AC input voltage115 V
AC input frequency60 Hz
Annual energy consumption331 kWh
Package weight111130 g
Weight and Dimensions IconWeight and Dimensions
Depth673.1 mm
Width812.8 mm
Height1793 mm
Weight104326 g
Depth with door open1450 mm

Related product manuals