8
Setting the PRO-SELECT™ Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for refrigerator to cool down completely. The refrigerator
will run continuously for the rst several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the refrigerator. Temperature is factory
preset to provide satisfactory food storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your personal satisfaction.
°F
To adjust the temperature setting, press the UP () key for warmer temperature and DOWN
() key for colder temperature on the control panel. Allow several hours for the temperature to
stabilize between adjustments. The refrigerator can be adjusted between 33°F (1°C) and 46°F
(8°C). By pressing the TEMP MODE key, the temperature display will toggle between °F and °C.
If door must be removed:
• Unplug the unit or switch the breaker
that supplies power to the unit to the off
position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the
top hinge from the cabinet.
• Remove the two ⅜” hex head bolts
from the top hinge with a ⅜” wrench or
socket.
• Lift the door upwards and pull up and away
from the cabinet until free of the bottom
hinge pin mounted on the front of the
cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
CAUTION
Doors are heavy. Two people are
recommended to remove or replace the door
assembly from the cabinet.
DOOR REMOVAL
ELECTRONIC CONTROL
Hinge Cover
Hinge Bolts (2)
Hinge Plate
To Next Page
Loading...
Need help?
General
Weight and Dimensions
