1
Button of hot water
Button of normal water
Button of cold water
Bottle supporter
Top cover
Power pilot lamp
Heating pilot lamp
Cooling pilot lamp
Tap of hot water
Tap of normal water
1
2
3
4
2 3
4
5
6
7
8
9
11
13
14
15
16
17
18
19
20
5
6
7
8
10
9
10
Tap of hot water
Water drainage hole*
Water collector
Door
Cooling switch
Heating switch
Outlet of cold water
Power supply cord
Outlet of hot water
Condenser
11
12
13
14
15
16
17
18
19
12
20
* Water will flow into the water collector from this hole when there's water in the
button, please timely clean the palce around the water drainage hole.
1) Tear the label from the bottle.
2) Vertically insert the bottle into the
bottle supporter on top of the
machine. Don't plug the power cord
or push the red switch until the
water runs out from the tap of hot
water.
3) Insert the plug to socket, then turn
on the power switch.
4) Indicators light up accordingly once
the machine works.
5) Vertically pull out the bottle by two
hands when the bottle is empty,
then replace it with another bottle of
water.
6) Never turn on the machine before
plugging the power cord to the
socket.
Do not plug the power cord or push the red switch until all water runs out from
the tap of hot water.
Description
Installation
ENG
ENG
21
22
Attention
To Next Page
Loading...
