29
If you want to change the
washing steps, press the
“SKIP CYCLE” key until
the indicator light is in the
desired position.
If desired, use the washing
options by pressing the
corresponding key:
• DOUBLE RINSE;
• ECONOMY;
• WATER TEMPERATURE.
The options are
independent. It can be used
in any combination.
Turn the washing machine
ON by pressing the “ON/
OFF” key. A green light next
to the key will turn ON to
indicate that the washing
machine is ON.
Select in the Washing Programs knob the
type of program you want to run according to
the laundry to be washed. This button can be
rotated to both sides.
Choose the water level according to the
amount of clothes. The clothes should move
freely during wash.
During the water inlet process, the washing
machine must remain closed.
Wait 5 seconds and washing machine starts
working. At the end of the program the washing
machine will automatically turns OFF and the
green light next to the “ON/OFF” key turns OFF
After pressing the ON/OFF key, the
programming may still be changed. After
this change wait 5 seconds for the washing
machine to start working again.
If you stopped the washing process before
the end of the complete cycle (examples:
blackout, the ON/OFF key pressed), when
turns the washing machine ON again, the
cycle restarts.
WARNING
It is recommended not to ll
the washing machine with
the help of a bucket or hose.
To Next Page
Loading...
Need help?
General
