Noise when unit starts
Record Your Model and Serial Numbers
Record in the space provided below the model and serial numbers. On all models, the
serial plate is located on the outside of the cabinet.
Model No.
Serial No.
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to the Frigidaire Company.
Normal Sounds
Today’s high efficiency compressors
may have a high pitched chatter
during the cooling cycle.
High pitched Chatter
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Vibration
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan.
Product Registration
Product Registration, Packaging & Normal Sounds
Gurgle/Hiss
“Gurgling or hissing” noise ma
A “da-da” sound may occur when the
unit is turned on in thirty seconds due
to the compressor starting (For Inverter
type). It is normal.
heard due to refrigerant passing
through evaporator during normal
operation.
y be
Packaging
Remove all packaging from inside the carton, along with any
inserts placed into the side louvers.
Pinging or Swishing
Droplets of water hitting condenser
during normal operation may cause
“pinging or swishing” sounds.
Note: Don’t try to drill any holes
on the base pan to eliminate the
normal sounds, otherwise it will
void the warranty.
PACKAGING INSERTS
6
.devreser sthgir llA.cnI ,stcudorP emoH xulortcelE 9002
To Next Page
Loading...
Need help?
General
