Frigidaire GRMC2273CD User Manual

8
INSTALLATION
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
• Rest all 4 corners of the cabinet
firmly on the floor.
• Slightly elevate the front to ensure
the doors close and seal properly.
• Align and level the doors with
each other.
Meet most of these conditions by raising
or lowering the adjustable anti-tip legs.
To level the cabinet using the anti-tip legs:
1. Slightly open freezer drawer.
2. Lower anti-tip legs until they are
both touching the floor. Use a pair of
pliers to adjust.
To raise unit: turn leg clockwise
(as shown).
To lower unit: turn leg counterclockwise.
Raise
Flipper Mullion
Adjust the flipper mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded
and perpendicular to the fresh food
door. If the mullion guide is not in the
correct position, it could prevent the door
from closing
completely.
WRONG
Anti-Tip
Legs
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and that the cabinet is stable.
Door
Door
Door
Door
To make final door height adjustments:
1. Open Custom-Flex Temp drawer to
make the lower hinge visible.
2. Insert 6 mm Allen
TM
wrench into the
shaft of the lower hinge.
To lower door: turn the adjustment
screw clockwise.
To raise door: turn the adjustment
screw counterclockwise
(as shown below).
12.25 in
8.75 in
1 in
1 in
36.75 in
933.4 mm
25.4 mm
.37 in
9.5 mm
.37 in
9.5 mm

Frigidaire GRMC2273CD Specifications

General

Brand	Frigidaire
Model	GRMC2273CD
Category	Refrigerator
Language	English