4
The Smart Soil Turbidity Sensor checks the soil level on your dishes in the Normal Wash cycle. Depending on
soil level, the sensor will determine if additional water fills are needed to clean the dishes or if water fills can
be deleted. Cycle time will vary based on the amount of soil on the dishes. Cycle time will also vary based on
the options selected and the incoming water temperature.
Operating Instructions (continued)
* Number of fills will vary depending on the soil level of each load.
Cycle Description Time
(Approx.
Minutes)
Number of
Washes/
Rinses
Heavy Wash Long cycle for heavy
food soils.
132 2 washes/3 rinses
Normal Wash Medium cycle for
average food soils.
Smart Soil Turbidity
Sensor is active with
this cycle.
97-117 1-2 washes*/1-2
rinses*
China Crystal Short cycle for light
food soils.
82 1 wash/2 rinses
Rinse Only Rinses dishes being
held until there is a full
load.
9 1 rinse
Quick Wash Quick cycle for light
food soils. Does not
include drying time.
38 1 wash/1 rinse
IMPORTANT:
• Depending on water temperature, there may be time added to the cycle to bring water up to
temperature.
• Only the following certified cycles with Sanitize option selected have been designed to meet NSF
requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization: Heavy Wash, Normal Wash
and China Crystal.
To Next Page
Loading...
Need help?
General
