Frigidaire Smart Choice 5304493868 User Manual

Deluxe Dishwasher Install Kit
5304493868
Trousse d’installation de lave-vaisselle de luxe
Kit de instalación de lavavajillas de lujo
5304493868 (March 2022)
Tools Required
Parts List
WARNING
ELECTRIC SHOCK HAZARD
Observe all national and local codes and ordinances for electrical and plumbing connections. Make sure electrical power has been
disconnected at fuse box or circuit breaker box. The dishwasher must be connected to a grounded metal, permanent wiring system. The
equipment-grounding conductor must be run with the circuit conductors and connected to the appliances equipment grounding terminal or lead.
Do not connect the dishwasher to the power supply until the appliance is permanently grounded. Failure to follow this warning could result in death
or serious injury.
This power supply has a 3-pronged grounded plug. The cord must be plugged into a compatible 3-pronged grounding wall receptacle, grounded
in accordance with all national and local codes and ordinances. If a properly installed wall receptacle is not available, it is the responsibility of the
customer to have a properly grounded receptacle installed. The wall receptacle should be within easy reach of this power supply cord. DO NOT USE
AN EXTENSION CORD! Such use can result in re, electrical shock, or other personal injury.
Braided Stainless Steel Hose
Strain Relief
T Connection ⅜ Threaded Connection Garden Hose Connection

Frigidaire Smart Choice 5304493868 Specifications

General

Brand	Frigidaire
Model	5304493868
Place Settings	14
Wash Cycles	6
Energy Star Certified	Yes
Soil Sensor	Yes
Delay Start	Yes
Drying Option	Heated Dry
Color	Stainless Steel

Summary

Safety Warnings

Electric Shock Hazard

Observe codes, disconnect power, and ensure dishwasher is grounded to prevent death or injury.

Tools and Parts

Tools Required

List of tools needed for the dishwasher installation kit, including pliers, wrenches, and screwdrivers.

Parts List

Components included in the deluxe dishwasher install kit, such as hoses, fittings, and strain relief.

Installation Procedure

Waterline Connection

Connect the water supply T fitting to the faucet riser tube and shut-off valve, then connect the braided hose.

Dishwasher Connection

Connect the dishwasher to the water supply using either a 3/8" threaded or hose bib connection.

Post-Installation Checks

Check for Leaks

Turn on water supply valves, inspect all connections for leaks, and tighten if necessary.

Electrical Supply Connections

Connect the power cord to the dishwasher wiring in the junction box, ensuring proper grounding and secure connections.