What to do if my FRIGOGLASS Super 1300 has water on the floor?
If you find water on the floor near your FRIGOGLASS Freezer, it could be due to a blocked drainage hole for condensate water. Try unblocking the drainage hole. If the issue persists, there might be a leakage in the tray, which requires a service technician.
Why is my FRIGOGLASS Super 1300 ICM not working?
Your FRIGOGLASS Freezer ICM might not be working due to several reasons: * The power cord may not be plugged in, so ensure it is properly connected. * There might be no power coming through the socket; check the fuse/MCB on the mains. * The thermostat setting may be incorrect; rotate the thermostat knob clockwise. * If you've recently reloaded the ICM with warm products, it can take 8-16 hours to cool them down. Preferably, reload the ICM before night closing. * Improper loading can block air circulation. Load the ICM according to the standards provided by the company.
Why does my FRIGOGLASS Super 1300 ICM sometimes make noise?
A certain amount of noise is unavoidable because a powerful mechanism is needed. Also, Ice Cold Merchandisers are of dynamic type, according to the specifications that the company is offering. If you hear intense metallic noise, call a service technician. If the floor is inclined or curved, level the ICM properly by adjusting its feet, using a spirit level to assist you.
Step-by-step guide for unpacking, leveling, placement, and mains connection.
Recommended procedures for regular maintenance to ensure optimal performance.
General| Brand | FRIGOGLASS |
|---|---|
| Model | Super 1300 |
| Category | Freezer |
| Language | English |
To Next Page