What to do if my FRIGOGLASS Freezer has water on the floor?
If you find water on the floor near your FRIGOGLASS Freezer, it could be due to a blocked drainage hole for condensate water. Try unblocking the drainage hole. If the issue persists, there might be a leakage in the tray, which requires a service technician.
Why is my FRIGOGLASS Super 800 HD ICM not working?
Your FRIGOGLASS Freezer ICM might not be working due to several reasons: * The power cord may not be plugged in, so ensure it is properly connected. * There might be no power coming through the socket; check the fuse/MCB on the mains. * The thermostat setting may be incorrect; rotate the thermostat knob clockwise. * If you've recently reloaded the ICM with warm products, it can take 8-16 hours to cool them down. Preferably, reload the ICM before night closing. * Improper loading can block air circulation. Load the ICM according to the standards provided by the company.
Why does my FRIGOGLASS Super 800 HD Freezer ICM sometimes make noise?
A certain amount of noise is unavoidable because a powerful mechanism is needed. Also, Ice Cold Merchandisers are of dynamic type, according to the specifications that the company is offering. If you hear intense metallic noise, call a service technician. If the floor is inclined or curved, level the ICM properly by adjusting its feet, using a spirit level to assist you.
Lists key technical details like voltage, thermostat range, defrost, and noise level.
Provides dimensions, volume, and net weight for different models.
Highlights HC refrigerant use and need for qualified installation for fire prevention.
Crucial safety measures for maintenance, grounding, power connections, and component replacements.
Steps for unpacking, checking damage, leveling, and proper unit placement.
Safety for children and avoiding improper defrosting methods.
General| Brand | FRIGOGLASS |
|---|---|
| Model | Super 800 HD |
| Category | Freezer |
| Language | English |
To Next Page