Fritz! 3000 AX - Device Features and Indicators; Connect Button Functions; Connection Quality LED Status; Connect LED Status Indicators

Connection Possibilities
You can connect the FRITZ!Repeater3000AX with a FRITZ!Box via Wi-Fi or
using a LAN cable.
Wi-Fi connection to the FRITZ!Box if LAN connection to the FRITZ!Box if
the FRITZ!Repeater is to be used within the
Wi-Fi range of the FRITZ!Box
the FRITZ!Repeater is to be used outside
the Wi-Fi range of the FRITZ!Box or anoth-
er repeater in the home network
multiple network devices without Wi-Fi are
to be integrated into the home network on
the LAN ports of the repeater
it is possible to establish a LAN con-
nection (for example using the existing
cabling in your home)
Connect
Info
Connect/WPS
Fon/DECT
WLAN
Power/DSL
WLAN
WLAN
LAN
Connect
Info
Connect/WPS
Fon/DECT
WLAN
Power/DSL
WLAN
LAN
Continue reading on page 20. Continue reading on page 21.
Device Features
Name Illustration Function Action/Meaning
Connect
button
Connect
Establish
connection
Press and hold for 1second
Connect with
another access
point
Press and hold for 6seconds
Load factory
settings
Press and hold for 15seconds
Connection
Quality
LED
Connect
On Connection good
Connect
On
Weak connection
Flashing
Connection interrupted
Connect
O
Wi-Fi disabled; a schedule may be
congured
Connect LED
Connect
On Connection good
Flashing
slowly (2 second intervals): not
connected with FRITZ!Box, no Wi-Fi
connection congured
fast (twice per second): WPS, restart
or update in progress
O Schedule enabled (wireless bridge)
LAN ports
Power
LAN 1 LAN 2
Connect network devices by cable
18