Fritz! 3000 AX - Setting Up Wi-Fi Connection

Setting Up the Wi-Fi Connection
Action Illustration
1
Connect the FRITZ!Repeater to an outlet close to the FRITZ!Box
and wait until the Connect LED starts to ash slowly.
Connect
2
Start the connection to the FRITZ!Repeater: Press the Connect
button. The Connect LED ashes quickly.
Connect
3
Start the connection on your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press
button briey. The WLAN or Connect LED ashes.
• On a FRITZ!Box with the WLAN/WPS or WLAN button: Press
the button for about 6seconds until WLAN starts ashing.
• On another wireless router, press the button that starts WPS.
within
2 minutes
4
As soon as the Connect LED on the FRITZ!Repeater lights up
permanently, the connection has been established.
If the Connect LED starts ashing slowly again, repeat steps 2
and 3 of these instructions.
Connect
When the connection has been established, reposition the FRITZ!Repeater.
Continue reading on page 22.
If the Wi-Fi connection cannot be established at the touch of a button, you will
nd alternative instructions in the PDF manual at en/avm.de/service.
20