EasyManua.ls Logo

Fritz! Box 3370 - Physical Specifications; Cable

Fritz! Box 3370
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Physical Specifications
FRITZ!Box 3370 107
18.4 Physical Specifications
Dimensions (W x D x H): ca. 226 x 160 x 47 mm
Supply voltage: 230 V / 50 Hz
Maximum power consumption: 19 W
FRITZ!OS can be updated
Conforms to CE standards
Ambient conditions
operating temperature: 0 °C – +40 °C
storage temperature: -20 °C – +70 °C
relative humidity (operation): 10% – 90%
relative humidity (idle): 5% – 95%
18.5 Cable
Network Cable
The network cable (yellow) of the FRITZ!Box 3370 is a stan-
dard category 5 (Cat 5) Ethernet cable. Please use a standard
STP-type (Shielded Twisted Pair) Ethernet cable of category 5
(Cat 5) to replace or extend the Ethernet cable. To extend the
cable you will need a shielded RJ45 double coupling (Cat 5)
with a 1:1 pin assignment. You can use both straight cables
and crosslink cables. All components are available from spe-
cialized vendors.
When components of a category smaller than Cat 5 are used,
reduced transmission rates may result.
AVM recommends using a network cable no more than
100 meters long.

Table of Contents

Related product manuals