1. Plug the FRITZ!Repeater into an outlet
near your FRITZ!Box (wireless router).
The FRITZ!Repeater starts operation.
2. Wait until the LED starts slowly fl ashing
green. As soon as the LED slowly
fl ashes green, the FRITZ!Repeater is
ready for a connection.
3. Press the “Connect” button.
The LED fl ashes green more rapidly.
4. Within 2 minutes, start WPS on your
FRITZ!Box:
- FRITZ!Box with “WPS” or “Connect/
WPS” button: press button briefl y
- FRITZ!Boxes with “WLAN” or “WLAN/
WPS” button: press button for about 6
seconds until the “WLAN” LED fl ashes.
Powe
r
/
DSL
WLAN
Fo
n
/
DECT
Connec
t
/
WPS
Info
When the LED on the FRITZ!Repeater lights up permanently, the
wireless connection has been established.
Connecting the FRITZ!Repeater 600 to the Router at the
Touch of a Button (WPS)
The FRITZ!Repeater600
The FRITZ! Repeater 600 is a wireless repeater that extends the range of
your wireless network.
Here are the most important instructions for starting operation with your
FRITZ!Repeater. A PDF manual with descriptions of all functions and
instructions is available on our website
en.avm.de/service.
The FRITZ!Repeater 600 supports Mesh WiFi. Thanks to Mesh WiFi,
the FRITZ!Repeater combined with a FRITZ!Box with FRITZ!OS 7
automatically adopts the FRITZ!Box’s wireless LAN settings,
receives its updates via the FRITZ!Box, and its wireless LAN
performance is optimized. For more information on Mesh WiFi, see
the PDF manual and our website at
en.avm.de/mesh.
The FRITZ!Repeater 600 has a user interface which you can open in
a web browser on all connected devices.
1
2
3
4
76
To Next Page
Loading...
