Fritz! Fritz!Repeater 600 - Fritz!Repeater 600 in the Home Network; Fritz!Repeater 600 on a Fritz!Box with Mesh; Opening the User Interface of the Fritz!Repeater 600

FRITZ!Repeater 600 in the Home Network
FRITZ!Repeater 600 on a FRITZ!Box with Mesh
In the home network of a FRITZ!Box with Mesh (FRITZ!OS 7 or newer),
operation of your FRITZ!Repeater is especially easy and convenient.
• When Mesh is enabled, all of the FRITZ!Box’s wireless LAN settings are
permanently adopted.
• Updates for the FRITZ!Repeater can be performed directly in the FRITZ!Box
user interface under “Home Network / Mesh”.
• Mesh WiFi provides for the optimum wireless connections of all wireless
devices.
FRITZ!Repeater 600 on a FRITZ!Box without Mesh or
a Wireless Router from Another Manufacturer
• During confi guration the FRITZ!Repeater adopts the wireless network name
and password of the FRITZ!Box (wireless router).
• If the wireless network name and/or password is changed in the FRITZ!Box
(wireless router), the FRITZ!Repeater has to be reconnected.
• Settings and updates for the FRITZ!Repeater are confi gured and performed
via the FRITZ!Repeater user interface.
Opening the User Interface of the FRITZ!Repeater 600
• With a FRITZ!Box:
Enter
http://fritz.repeater in the web browser on a connected device
to open the user interface of the FRITZ!Repeater. Perform any update
available under “System / Update”.
• With another wireless router:
1. Open the user interface of the your wireless router to determine the IP
address assigned to the FRITZ!Repeater.
2. Enter the IP address in the web browswer to open the user interface of
the FRITZ!Repeater.
3. Secure your Repeater with a password the fi rst time you open the user
interface.
4. Perform any update available under “System / Update”.
1312