Fritz! FRITZ ! WLAN Repeater 310 - Page 3

Buttons
The following functions are set with
the WPS button:
Function Press for
Switch wireless LAN
on and off
1 sec.
Initiate WPS quick
connection
6 sec.
Restore factory
settings
15 sec.
LEDs
LED Condition Meaning
fl ashing No connection to the wireless access point / searching
for the wireless access point
on Signal strength
Power fl ashing Restarting the FRITZ!WLANRepeater.
Updating the fi rmware.
on The FRITZ!WLANRepeater is ready for operation.
WLAN fl ashing Adopting the wireless LAN settings.
Switching the radio network on or off .
fl ashing fast WPS was aborted; repeat procedure
on The wireless LAN module is ready for operation.
all fl ashing Restoring factory settings
Security
• Operate the FRITZ!WLAN Repeater
310 in a dry place that is free of
dust , and provide for suffi cient
ventilation.
• FRITZ!WLAN Repeater 310 is intend-
ed for indoor use only. Never let
liquids get inside the housing.
• Insert the the FRITZ!WLANRepeater
310 into an electrical outlet that is
easy to reach.
• Do not open the FRITZ!WLAN Repeat-
er 310 housing.
• Unplug the FRITZ!WLAN Repeater
310 from the outlet before cleaning.
4 5