Need help?Do you have a question about the Fritz! Powerline 1000E and is the answer not in the manual?
General| Type | Powerline Adapter |
|---|---|
| Maximum Data Transfer Rate | 1000 Mbps |
| Interface | Gigabit Ethernet |
| Encryption | 128-bit AES |
| Ports | 1 x Gigabit Ethernet |
| Powerline Standard | HomePlug AV2 |
| Standard | IEEE 1901 |
| Frequency Range | 2-68 MHz |
| Operating Voltage | 100-240 V |
| Operating Temperature | 0°C to 40°C |
| Plug Type | Type F (Schuko) |
Identifies the single button and three LEDs present on the FRITZ!Powerline adapter.
Details the functions performed by pressing the 'Powerline Security' button for different durations.
Explains the status indicated by the Power, LAN, and Powerline/Security LEDs on the adapter.
Describes the gigabit Ethernet LAN port for connecting network devices to the FRITZ!Powerline adapter.
Step-by-step guide to setting up a new powerline network using the FRITZ!Powerline 1000E Set.
Instructions for adding a new FRITZ!Powerline adapter to an already established powerline network.
Guide for integrating powerline adapters from different brands into the FRITZ!Powerline network.
Explains how to connect various network devices like PCs, TVs, and consoles via LAN.
Details the built-in encryption (128-bit AES) and network password for secure data transmission.
Explains that external access is prevented by requiring button presses on adapters.
Guides users on how to change the preconfigured network password for enhanced security.
Step-by-step instructions to access the FRITZ!Box interface and locate FRITZ!Powerline settings.
To Next Page
