Fritz! Repeater 6000 - The FRITZ!Repeater 6000 Overview; Mesh Networking with FRITZ!Box

The FRITZ!Repeater6000
The FRITZ! Repeater6000 extends the Wi-Fi network of a FRITZ!Box or any
other wireless router. On its two LAN sockets, additional network devices can
be connected to the FRITZ!Repeater, or it can be connected with a FRITZ!Box
or another wireless router by cable.
Manual
This quick guide includes important information for launching operation of
your FRITZ!Repeater6000. All further information is presented in our PDF
manual and in the Knowledge Base at en.avm.de/service.
Wireless Routers from Other Manufacturers
You can use the FRITZ!Repeater6000 with routers from other manufacturers.
For the sake of simplicity, this quick guide will refer to the FRITZ!Box, unless a
given function is only supported by a certain type of device.
Mesh with FRITZ!
The FRITZ!Repeater6000 supports Mesh in combination with a FRITZ!Box
with FRITZ!OS7.0 (or higher).
In the Mesh of a FRITZ!Box, FRITZ! products with Wi-Fi functionality automati-
cally adopt various settings to build an especially powerful Wi-Fi network. The
Mesh Overview of the FRITZ!Box user interface presents information on the
connections in the Mesh and allows you to update your FRITZ! products.
3