Fritz! Stick N - AVM Stick & Surf Technology

AVM Stick&Surf Technology
With AVM Stick&Surf technology you can automatically transmit the WLAN secu-
rity settings of your FRITZ!Box to the FRITZ!WLANUSB StickN and to your computer.
For this, your FRITZ!Box must be equipped with a TypeA port for USB devices (cf.
the illustration in the margin).
If your FRITZ!Box is not equipped with such a port, you can use the FRITZ!WLAN control soft-
ware to change the WLAN security settings. For information, see the installation instructions.
In order to use the Stick&Surf technology, perform the following steps:
1. Insert the FRITZ!WLANUSB StickN into the USB port on your FRITZ!Box and wait until the
“INFO” LED remains lit.
Connecting the FRITZ!WLANUSB StickN with a FRITZ!Box
2. Insert the FRITZ!WLANUSB StickN into the USB port on your computer.
Connecting the FRITZ!WLANUSB StickN with a notebook
3. After successful transmission of the security settings, the Stick&Surf logo is displayed
on the screen.
A WLAN connection between your FRITZ!Box and the FRITZ!WLANUSB StickN is estab-
lished automatically.