Fritz! Stick N - Establishing a WLAN Connection; The FRITZ!WLAN Control Software

Establishing a WLAN Connection
If you performed installation using Stick&Surf, no further steps
are necessary. You can now work with the automatically established
WLAN connection to your FRITZ!Box.
If you performed installation without using Stick&Surf, you have
to select the WLAN remote site (the WLAN access point) to connect with manually in your
WLAN control software.
If the FRITZ!WLAN control software does not automatically search for WLAN devices in your
vicinity, click the “Find” button.
Once a list of the WLAN access points found is displayed, proceed as follows:
1. Double-click the WLAN device (WLAN access point) to which you would like to establish a
connection.
2. Enter the network key of the WLAN access point.
On the AVM FRITZ!Box family products, the network key is printed on the underside of
the device.
3. The WLAN connection is established.
Once the connection is established, the WLAN icon in the notifi cation area of
the Windows taskbar turns green. Click the icon to display connection details.
Please see also the section “The FRITZ!WLAN Control Software”.
The FRITZ!WLAN Control Software
With the FRITZ!WLAN control software you can establish WLAN connections to a variety of
WLAN devices, clear these connections and display them. Establishing connections with
FRITZ!WLAN is always based on the same principle: search, fi nd and connect.
Every time the computer starts, the FRITZ!WLAN icon appears in the notifi cation area of the
taskbar:
 Clicking once opens a context menu with which you can establish, clear, and
display connections.
 Double-click to open the FRITZ!WLAN control software.
FRITZ!WLAN control software
Click the connection icon to
display the connection properties
and to establish or clear the
connection.
Click the icon of a WLAN device to
display its properties or
manage the device.