Need help?Do you have a question about the Frizzlife DW10F and is the answer not in the manual?
General| Brand | Frizzlife |
|---|---|
| Model | DW10F |
| Category | Water Filtration Systems |
| Language | English |
Mount the filter system onto a plate using provided screws. Ensure 2 inches clearance.
Cut the 1/4" tubing into two sections for inlet and outlet based on need.
Connect the inlet tubing through the nut of the 3-way feed water valve.
Shut off water, connect the 3-way valve to the angle valve and feed water hose.
Connect inlet and outlet tubing to the filter system's respective ports.
Turn on water supply, check for leaks, and flush the system for 15 minutes.
To Next Page
