Need help?Do you have a question about the Frizzlife FK99 Series and is the answer not in the manual?
Shows the Frizzlife FK99 Series filter, cartridge type, operating temperature, working pressure, and flow rate.
Find installation videos online and register for an extended warranty by email or QR code.
Inspect the product box and components for damage or missing parts before proceeding with installation.
Details technical specifications like filter type, replacement period, flow rate, water source, temperature, and pressure.
Identifies and lists all included components for the Frizzlife FK99 Series water filter system.
Illustrates a typical connection setup for the FK99 model under a sink.
Provides guidance on selecting and connecting appropriate converters for 3/8" or 1/2" angle valve outlets.
Lists critical safety and operational warnings, including water quality, freezing, and handling small parts.
Connects the inlet water hose to the supply end of the water filter system.
Attaches the filter system to a surface using screws and a provided sticker for guidance.
Guides the user through shutting off water, removing the original hose, and connecting the filter.
Procedures to turn on the water supply, check for leaks, and flush the filter for 10 minutes.
Details on how to twist, unscrew, and replace the old filter cartridge with a new one.
Information on connecting the FK99 Series filter to refrigerators or ice makers using an extra kit.
Presents influent challenge concentration vs. maximum permissible product water concentration for various substances.
Addresses issues like threaded connection leaks and inaccurate TDS meter readings.
Lists conditions that will void the product warranty, such as misuse or improper installation.
Defines owner's responsibility for periodic maintenance and contacting the retailer for defects.
Instructions to email order ID and full name or scan a QR code to register for an extended warranty.
This document provides an installation guide for the Frizzlife FK99 Series undersink water filter system, including models FK99, FK99M, and FK99L. The system is designed to provide filtered water directly from your cold water line, offering a convenient and effective solution for improving water quality in your home.
The Frizzlife FK99 Series is an undersink water filter system that utilizes a 0.5-micron composite carbon block filter. Its primary function is to reduce various contaminants from your tap water, including lead, other heavy metals, sediment, and chlorine. This process aims to deliver cleaner, better-tasting water for drinking and cooking. The system is specifically designed for cold water use and should not be used with microbiologically unsafe water or water of unknown quality without adequate disinfection before or after the system. It's important to note that while the system effectively removes harmful contaminants, it is engineered to retain essential minerals like Calcium, Potassium, Sodium, and Magnesium, which contribute to healthy water. Therefore, a TDS (Total Dissolved Solids) meter is not an effective tool for measuring the water quality produced by this system, as it will still show a certain level of dissolved solids due to the presence of these beneficial minerals.
The Frizzlife FK99 Series water filter system is designed for straightforward installation and user-friendly operation. Before installation, it's recommended to watch the installation video available on YouTube by searching "Frizzlife FK99 installation." The system comes with a comprehensive part list, including a system cap, water filter cartridge, housing wrench, 3/8"-1/2" converter, mount-up screws, Teflon tape, drilling hole sticker, and an inlet hose.
Installation involves several key steps. First, connect the inlet water hose to the supply end of the water filter system. Next, the system needs to be mounted onto a wooden plate using the provided sticker to mark screw spots and an electric screwdriver to fasten the screws. A crucial note for installation is to mount the water filter at least 4 inches lower than the bottom of the basin to facilitate easier installation and future maintenance. The system is then connected to the cold water supply. This involves shutting off the water supply, removing the original hose from the cold angle valve, connecting the inlet hose of the filter system to the cold angle valve, and then connecting the original faucet hose to the outlet port of the filter system. Once all connections are made, the valve can be turned on.
After installation, it's essential to check for leaks and flush the filter. Turn on the water supply and carefully inspect all connections for any signs of leakage. If leaks are detected at threaded connections, plumber's tape should be used to prevent further leakage. Following the leak check, the filter should be flushed for 10 minutes before its first use to ensure optimal performance and remove any manufacturing residues.
The FK99 Series also offers an optional feature to hook up to your refrigerator or ice maker. This requires an extra IMC-2 ice maker connection kit, which is not included with the main system. Users can search for "Frizzlife IMC-2" or Asin# "B07RBMLR26" on Amazon to purchase this kit.
Maintaining the Frizzlife FK99 Series system primarily involves replacing the filter cartridge. The system is designed with an "AUTO Shut off" feature, which means you do not need to shut off the main water supply when performing a filter replacement, making the process more convenient and mess-free.
The filter replacement instructions are simple:
The replacement period for the filter cartridge varies by model:
It is important to keep the housing wrench in a safe place, as it is necessary for filter replacement.
The product comes with a one-year limited warranty from Frizzlife INC, covering defects in material and workmanship. This warranty ensures that Frizzlife will replace or repair components deemed broken within the warranty limits, free of charge. However, the warranty is void if defects occur due to failure to observe specific conditions, such as using water exceeding 100°F, outdoor use, exposure to direct sunlight or freezing, or if the system is not used in accordance with the installation and maintenance instructions. Filter cartridges are considered disposable items and are not covered by the warranty. Customers are responsible for proper operation and continual leak inspection.
Frizzlife also offers a 150% extended warranty. To register for this, customers need to email their order ID and full name to support@frizzlife.com or scan a provided QR code. This extended warranty emphasizes the company's commitment to customer satisfaction and product longevity.
General| Installation Type | Under Sink |
|---|---|
| Product Type | Under Sink Water Filter |
| Filtration Stages | 3 |
| Flow Rate | 2 GPM (Gallons Per Minute) |
| Certifications | NSF/ANSI 42, NSF/ANSI 372 |
| Operating Temperature | 40-100°F (4-38°C) |
To Next Page
