6
P318manen-12.fm
3 TECHNICAL DATA
Description of the tool
The tool model P318 has been designed to strap packages with plastic strapping. The plastic strapping is fed
around the package manually or in combination with a strap feeder. The straps are inserted in the tool,
automatically tensioned, sealed by friction welding and separated.
Tool size with battery
Length with battery N5.4328: 330 mm / 13"
Length with battery N5.4330: 350 mm / 13.8"
Width : 122 mm / 4.8"
Height: 130 mm / 5.2"
Weight
with battery N5.4328: 3.4 kg / 7.5 lbs
with battery N5.4330: 3.7 kg / 8.2 lbs
Noise information
The A-weighted equivalent continuous sound level at the work place of the machine operator is
typical 79 dB (A).
This value was determined according to DIN EN 60745-1 (12.2003).
Deviation K: 3 dB
Vibration information
The weighted effective value of the acceleration typically amounts to less than 2.5 m/s
2
.
This value was determined according to DIN EN 60745-1 (12.2003).
Deviation K: 0.6 m/s
2
Strap material
Strap qualities: PET (Polyester) and PP (Polypropylene) plain or embossed (see chart of types).
Use only plastic straps recommended by your sales shop (name and address
on the rear of the operation manual).
Strap dimensions: 8.0 - 13.0 mm x 0.35 - 0.8 mm (see chart of types).
Use only plastic straps with the correct strap dimensions for your tool.
Strap tension
Tensioning force*: Adjustable from 150 - max. 800 N / 34 - max. 180 lbs.
Tensioning speed*: approx. 150 - 300 mm/s / 5.9 - 11.8 inch/sec.
Joint strength*: approx. 75% of the tensile strength of the plastic strap.
* The value depends on the strap quality.
Working temperature
The ambient temperature should be between -10° and 45° C (14° and 113°F).
The best performance is achieved between 15° and 20°C (59° and 68°F).
For Parts & Service 1-877-862-6699
To Next Page
Loading...
