To Next PageTo Next Page
Need help?Do you have a question about the Fromm P323 and is the answer not in the manual?
General| Brand | Fromm |
|---|---|
| Model | P323 |
| Category | Power Tool |
| Language | English |
Safety precautions for battery handling and disposal.
Warning about wearing safety glasses to prevent severe eye injury.
Guidelines for safe tool operation and user responsibility.
Importance of proper seal control for load security and injury prevention.
Instructions for safe strap dispensing and storage.
General safety advice regarding strap usage for lifting loads.
Risks and consequences of improper strap tensioning or material.
Safe procedures for cutting tensioned straps.
Maintaining work area tidiness and balance for fall prevention.
Importance of tool maintenance and avoiding modifications.
Overview of the P323 tool's design and function for plastic strapping.
Dimensions and weight of the P323 strapping tool with battery.
A-weighted sound level measurement for the tool at the operator's workplace.
Weighted effective value of acceleration for the strapping tool.
Specifications for compatible PET and PP strap qualities and dimensions.
Details on tensioning force, speed, and joint strength.
Recommended ambient temperature range for optimal tool performance.
Information on available NiCd and NiMH batteries for the tool.
Details on standard and turbo chargers for different battery types.
Optional part to protect the tool base from abrasion on rough surfaces.
Options for suspending the tool using a spring-loaded balancer or bracket.
Kit for adjusting tension force and welding time with an Allen key.
Meaning of LED lights during tool operation for status feedback.
Instructions for tool setup, battery insertion, and charging status display.
How to preselect strap tension, tensioning speed, and welding time.
Procedure for correctly feeding the strap around the package.
Steps for properly inserting the strap into the tool guides.
Procedure for tensioning the strap using the switch rocker.
Process for sealing the strap joint by friction welding.
Steps for safely removing the tool after sealing.
Visual inspection methods to check the quality of the strap seal.
Step-by-step guide for disassembling and assembling tensioning wheel and grippers.
Procedure for replacing the cutter, welding stop gripper, and welding gripper.
Instructions for readjusting the coupler after component replacement.
