158
Relevant Standards and Directives
CE Conformity
Marking
The equipment complies with all the requisite and relevant standards and directives that
form part of the relevant EU directive, and therefore is permitted to display the CE mark.
Parallel Operation
of In-Plant Power
Generation Sys-
tems
The inverter complies with the
- "Guidelines for connection and parallel operation of in-plant generation systems with
the low-voltage grid" published by the German Electricity Industry Association
(VDEW)
- "Technical guidelines for parallel operation of in-plant generation systems with distri-
bution networks" published by the Association of Austrian Electricity Companies.
Circuit to Prevent
Islanding
The inverter has a circuit for preventing islanding which is approved by the Professional
Association for Precision Mechanics and Electronic Engineering in accordance with DIN
VDE 0126-1-1.
Grid Failure The standard measurement and safety procedures integrated into the inverter ensure that
the power feed is immediately interrupted in the event of a grid failure (shut-off by the utility
or damage to lines).
To Next Page
Loading...
