Need help?Do you have a question about the Fronius Symo GEN24 3.0-10.0 kW and is the answer not in the manual?
General| Model | Fronius Symo GEN24 3.0-10.0 kW |
|---|---|
| Type | Hybrid Inverter |
| Power Range | 3.0-10.0 kW |
| IP Rating | IP66 |
| DC connection | MC4 |
| Number of MPP trackers | 2 |
| Max. output power (Pac,max) | 10.0 kW |
| AC nominal power (Pac,r) | 10.0 kW |
| AC voltage range (Uac min - Uac max) | 180 - 280 V |
| Frequency (fac) | 50 / 60 Hz |
| THD | < 3% |
| Operating temperature range | -25°C to +60°C |
| Cooling | Active cooling |
| AC Output Voltage | 230 V |
| Communication | Ethernet, Wi-Fi |
| AC connection | Screw terminals |
| European efficiency (ηEU) | 97.7% |
| DC Overvoltage protection | Yes |
| Warranty | 10 years |
| Efficiency | 98.2% |
Important safety warnings for operating and installing the inverter, including risks of injury and damage.
Statement confirming compliance of Fronius Symo GEN24 with Directive 2014/53/EU for radio equipment.
Information on permitted battery configurations for Fronius GEN24 inverters.
URLs for detailed manuals specific to different Fronius Symo GEN24 models.
Link to detailed, country-specific warranty terms for Fronius products.
Explanation of common warning signs used on the device and in the manual.
List of tools needed for installation and maintenance of the inverter.
Notes on DC voltage, IEC standards, and RCD requirements for safe installation.
Information regarding the device's rating plate and general safety guidelines.
Specifies environmental conditions and installation requirements for optimal performance.
Visual guide detailing the physical installation steps for the inverter.
Detailed steps for connecting AC and DC power cables to the inverter terminals.
Instructions for securely connecting the photovoltaic (PV) input cables.
Steps for verifying the correct and secure connection of DC power sources.
Instructions for connecting the inverter for data communication via LAN1.
Procedure for initial setup and commissioning of the Fronius GEN24 inverter.
Explanation of the inverter's control panel LEDs and status indicators.
Guide for configuring the inverter using a mobile phone and the Fronius Solar.start app.
Instructions for setting up the inverter using a PC connected via Ethernet.
Instructions for connecting and configuring the inverter via PC using WLAN.
Technical specifications related to the inverter's WLAN communication.
Physical dimensions and key technical specifications for different GEN24 models.
Access information and tools for monitoring inverter performance and system data.
Fronius International GmbH contact details and information on finding service partners.
To Next Page