Need help?Do you have a question about the Fronius Symo GEN24 and is the answer not in the manual?
General| Power Output Range | 3.0 - 10.0 kW |
|---|---|
| AC voltage range | 180 - 280 V |
| THD | < 3 % |
| Number of MPP trackers | 2 |
| Protection Rating | IP66 |
| Operating Temperature Range | -25°C to +60°C |
| Max. apparent AC power | 10.0 kVA |
| AC nominal voltage | 230 V |
| Frequency | 50/60 Hz |
| DC input voltage | Max. 1000 V |
| MPP voltage range | 200 - 800 V |
| Max. input current per MPP tracker | 12.5 A |
| Communication Interfaces | Ethernet, Wi-Fi |
| Cooling | Active cooling |
Steps for safely powering down the inverter before maintenance.
Procedures for connecting Fronius Smart Meter TS 65A-3 and 63A-3.
Guidance on installing the terminating resistor for communication stability.
Final steps for closing the system and initiating operation.
Guide to using the Fronius Solar.start app for PV system setup.
Information on the Be Connect app for system monitoring and control.
Instructions for the terminating resistor for LG RESU FLEX communication.
Final steps for closing and commissioning the LG RESU FLEX system.
Diagram showing final wiring connections between inverter and LG RESU FLEX.
To Next Page