Front Runner TOYOTA 4RUNNER - Clean Surface and Mount Ladder

LATF002_REV_A01
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.4
2.5
2.6
Clean the surface where the Top Mount
Bracket (Item 5) will be secured with
de-natured alchohol.
Hook the Ladder assembly from 2.1 and 2.2
over the Top Mount Bracket.
Position the Ladder assembly next to the
masking tape.
Making sure it is level, mark the Bottom
position of the ladder with masking tape as
shown (A).
Remove the Ladder assembly.
Open the Rear hatch and remove the left
hand side handle as shown.
A
Denatured
Alcohol
5