Frontier BB5060 - Introduction

2 Introduction
TO THE DEALER:
Assembly and proper installation of this product is the responsibility of the Frontier dealer. Read manual
instructions and safety rules. Make sure all items on the Preparation Check List in the Operator’s Manual are
completed before releasing equipment to the owner.
TO THE OWNER:
Read this manual before operating your Frontier equipment. Keep this manual handy for ready reference.
Require all operators to read this manual carefully and become acquainted with all adjustments and operating
procedures before attempting to operate the equipment. Replacement manuals can be obtained from your selling
dealer.
The equipment you have purchased has been carefully engineered and manufactured to provide dependable
and satisfactory use. Like all mechanical products, it will require cleaning and upkeep. Lubricate the unit as
specied. Please observe all safety information in this manual and safety decals on the equipment.
For service, your authorized Frontier dealer has trained mechanics, genuine Frontier service parts, and the
necessary tools and equipment to handle all of your service needs.
Use only genuine Frontier service parts. Substitute parts will void the warranty and may not meet standards
required for safe and satisfactory operation. Record the model number and serial number of your equipment in
the spaces provided:
This is the safety alert symbol. it is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.
Is used to address practices not related to personal injury.
Indicates helpful information.
WARNING
CAUTION
IMPORTANT
NOTE
Model ____________________________ Date of Purchase ____________________________________
Serial Number: (see Safety Decal section for loaction) ___________________________________________
Provide this information to your dealer to obtain correct repair parts.
Throughout this manual, the term IMPORTANT is used to indicate that failure to observe procedures can cause
damage to equipment. The terms CAUTION, WARNING and DANGER are used in are used in conjunction
with the Safety-Alert Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items
of personal safety.