Need help?Do you have a question about the Frontier WR3008 and is the answer not in the manual?
General| Brand | Frontier |
|---|---|
| Model | WR3008 |
| Category | Farm Equipment |
| Language | English |
Details on product warranty, coverage duration, exclusions, and service procedures.
Information on warranty termination upon transfer and limitations for commercial use.
List of checks for the dealer to ensure correct operation before delivery.
Key information and steps to explain to the customer during delivery.
Detailed technical specifications for WR3008, WR3010, and WR3012 models.
Notes on determining rake side and identifying hardened bolts.
Torque specifications for inch-based cap screws by grade and size.
Torque specifications for metric cap screws by grade and size.
Guidelines for using torque values, shear bolts, and lock nuts.
Explanation of the safety-alert symbol and its importance for personal injury.
Clarification of the term 'Tractor' used in the manual.
Understanding safety alert symbols and signal words for hazard identification.
Adhering to manual and machine safety messages and keeping signs in good condition.
Importance of adhering to the 32 km/h (20 mph) transport speed limit.
Rules for operator qualification, keeping others clear, and minor restrictions.
Procedures for cleaning, maintenance, transport, and storage safety.
Importance of guards, shields, and heeding warnings on decals.
Warnings about staying clear of moving parts and reading the manual.
Precautions regarding high-pressure oil leaks and checking for them.
Warnings about using transport lock pins and adhering to transport speed.
Checks for assembly, bolt tightening, tire pressure, and hitch connection.
Details on adjusting the tractor hitch for level rake beams.
Explanation of transport lock pins for securing rake beams.
Procedure for configuring the rake for one-sided raking.
How to adjust rake width on each side independently for various conditions.
Procedure to adjust windrow width from 4' to 6' in 6" increments.
Adjusting the stop for rake arm down pressure and ground clearance.
Procedure for adjusting wheel spacing on WR3012 model.
Using hydraulic float position and requirements for dual hoses.
How the optional center kicker wheel aids in hay pickup and operation.
Identification and count of all grease fittings on the rake.
Recommendations for greasing frequency and using high-quality grease.
List and location of all safety and model identification decals.
Instructions on not removing or damaging decals and replacing them if lost.
Troubleshooting common problems with rake lifting arms not lowering or raising.
Diagnosing issues related to hydraulic couplers and tractor pressure.
Procedure for ordering replacement parts, including required information.
Information on Frontier's commitment to product improvement.
Blank section for recording service dates, descriptions, and notes.
To Next Page
