RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this symbol
on your machine or in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe operating
practices.
UNDERSTAND SIGNAL WORDS
A signal word- DANGER, WARNING, or CAUTION - is
used with the safety-alert symbol. DANGER identifies the
most serious hazards.
Safety signs with signal word DANGER or WARNING are
typically near specific hazards.
General precautions are listed on CAUTION safety signs.
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual,
and all safety signs on your machine. Follow all
recommended precautions and safe operating
procedures.
Keep signs in good condition. Immediately replace
any missing or damaged signs.
-8-
OBSERVE MAXIMUM TRANSPORT SPEED
The maximum transport speed for this
implement is 32 km/h (20 mph).
Some tractors are capable of operating at speeds that exceed
the maximum transport speed of this implement. Regardless of
the maximum speed capability of the tractor being used to tow
this implement, do not exceed the implement’s maximum
transport speed.
Exceeding the implements maximum transport speed can result in:
" Loss of control of the tractor/implement combination
" Reduced or no ability to stop during braking
" Implement tire failure
" Damage to the implement structure or its components
Use additional caution and reduce speed when towing under
adverse surface conditions, when turning, and when on inclines.
Do not attempt transport if the fully loaded implement weighs more
than 1.5 times the weight of the tractor.
To Next Page
Loading...
