OPERATION (Continued)
TRANSPORT LOCKS
There are two (D) transport locks on the Carted Rake. The transport pins (5HP10WR4) lock the rake
beams into the up position for Cleaning or working on the rake and for transport and storage. The pins
should be in the storage position (E) during operation.
-12-
ONE SIDED RAKING
Raking with one side can be accomplished by locking the left rake arm in the transport position (F),
disconnecting the lifting linkage 5HP10WR35 or 5HP12WR5) (G), then putting it into the lifting linkage
storage position (H).
D
E
FHG
To Next Page
Loading...
