REF DESCRIPTION FREQUENCY
1 Front U-Joint 8 Hours
2 Caster Wheel (Four wheels) 8 Hours
3 Caster Pivot (Four wheels) 8 Hours
4 Left Spindle (Access through hole) 24 Hours
5 Shield Bearings 8 Hours
6 Rear U-Joint 8 Hours
7 Gearbox (Fill to center of horizontal shaft with SAE 80W or 90W
gear lube)
Check Daily
8 Right Spindle (Access through hole) 24 Hours
9 Center Spindle (Access through hole) 24 Hours
10 Slip Joints 8 Hours
To Next Page
Loading...
