5CS2006OM (rev 00 07/2020) 19Operation
Spraying with the Spray Nozzle
CAUTION: Avoid Injury! DO NOT use
spray gun while tractor is in motion.
1. Turn all Section Control Valves to OFF.
2. Squeeze the handle (A) to spray.
3. Adjust mist to stream using lever (B).
4. Spray guard (C) can be adjusted by
loosening (D) and sliding spray guard
to desired position. The spray guard is
intended to keep over-spray off your hands.
5. Flip handle lock (E) forward to lock handle in
ON position.
C
D
B
A
E
To Next Page
Loading...