CAUTION: Before you work around hitch:
• STOP engine.
• LOCK park brake.
• FIRMLY block tiller on horizontal surface.
Raising parking stand
1. Remove spring locking pin (C).
2. Slide parking stand (A) all the way up on tiller bracket
(B).
3. Fasten with spring locking pin (C).
Lowering parking stand
1. Remove spring locking pin (C).
2. Slide parking stand (A) and put down on tiller bracket
(B).
3. Install spring locking pin in order to secure parking
stand to the tiller bracket.
4. Fasten with spring locking pin (C).
Leveling attachments (side-to-side)
1. Start the engine. Raise the tiller.
2. Stop the engine. Lock the park brake.
CAUTION: DO NOT work under a raised
tiller unless it is safely supported.
OPERATING
Operating - Page 17
C
B
A
A
C
B
Wear appropriate clothing
• Wear close fi tting clothing and safely equipment appropriate for the job.
• Loud noise can cause impairment or loss of hearing, wear a suitable protective device such as ear-
plugs.
Stay clear of rotating drivelines
Entanglement in rotating driveline can cause serious injury or death:
• Wear close fi tting clothing
• Stop the engine and be sure PTO drivelines is stopped before getting near it.
To Next Page
Loading...
