Instruction Manual
BUILT TO LAST | MANUFACTURED TO COMPLY | DESIGNED TO PROTECT
1
11
be documented and kept as outlined under OSHA recordkeeping regulations.
No user or employee shall perform work without the proper training and
understanding on how to properly and safely use this product.
The Frontline 4-Way anchor plate is an active fall protection system that meets
all of the design requirements or applicable standards set forth by OSHA 1926,
1910 and ANSI Z359: The anchor can be used for 1 person in fall arrest or two
in fall restraint. The Frontline 4-Way anchor plates are safety devices intended
to be installed on roofs with ribbed steel decking, plywood sheathing or solid
concrete slabs.
DESCRIPTION
This Anchorage Connector has been tested for compliance with the requirements
of ANSI/ASSE Z359.18-2017. Testing covers only the Anchorage Connector and
does not extend to the connector, body harness, subsystem and/or substrate to
which the Anchorage Connector is attached to.
Prior to installation and use of this equipment, record the product identification
information from the label in the Inspection and Maintenance Log at the end of
this manual. Use a pen or fine point sharpie with blue or black ink when logging
inspections.
APPLICATION
To Next Page
Loading...
Need help?
General
