Smart Thermostat
Installation & Setup
Please carefully read PART ONE of the manual to complete your installation and setup. For further information and troubleshooting,
please refer to PART TWO.
PART ONE:
Installation…page 3
Setup…page 8
PART TWO:
Operations…page 10
Terminal Descriptions…page 13
Troubleshooting…page 14
INSTALLATION PRECAUTIONS: Before installing or servicing the thermostat, turn off power to the system at the circuit breaker. Leave
power off until the thermostat has finished installing or servicing. Follow all local codes and ordinances for wiring the system. Verify
that the system is 24 VAC before starting the installation. An amperage higher than 1 amp through each thermostat terminal may
cause damage to the thermostat.
To Next Page
Loading...