Using
1. Place the microphone around your neck and
connect clasp.
2. Adjust the neck straps to position the microphone
approximately 5in (14cm) from your mouth.
3. Press the Smart Button to wake the microphone. The power
indicator should be green.
NOTE: Your microphone will go into standby mode (off)
automatically after 10 minutes in mute mode or 10 minutes
of silence. Press the Smart Button to wake it.
4. Momentarily press the Smart Button to mute as needed for
private conversations. Mute indicator light will turn red.
5. Press and hold the Smart Button to issue a voice
command or trigger a programmed event. For detailed
instructions on using Voice Commands see page 5.
6. When the battery in your microphone gets low, the battery
indicator will flash red.
7. At the end of the day, charge your microphone.
Smart
Button
battery
indicator
power indicator
mute
indicator
5in/14cm
ITM-02 Pendant Microphone
16
To Next Page
Loading...
