Your ezRoom system is designed to receive up to 5 microphone signals at once*. Any combination of Pass-Around and Pendant
Microphones is possible. For example, use two Pendant Microphones (one for a teacher and one for a teacher’s aide) and three Pass-
Around Microphones for students, or one Pendant Microphone for a teacher and four Pass-Around Microphones for students.
Microphones must be on different channels or interference will occur. You can quickly program them to properly operate
on different channels.
NOTE: If you are using the ITM-02 Pendant Microphone with just one ISM-02 Pass-Around Microphone, you probably don't need to
program or set anything. The ITM-02 Pendant Microphone is factory set to transmit on channel A and the ISM-02 Pass-Around
Microphone is factory set to transmit on channel B.
If you have the Channel Expansion Module installed system and are using multiple microphones, you must assign channels using
the Microphone Settings software and set mic switch positions so that each ITM-02 Pendant and ISM-02 Pass-Around Microphone
transmits on a unique channel. Use the Recommended Channel Setting guide below to program channels and choose switch positions
for your microphones.
Using Multiple Microphones
Programming and switching the microphone channels
1. Use a USB cable to connect the microphone to a computer with the FrontRow
Microphone Settings software application** installed.
2. Open the Microphone Settings software application.
3. Click the Microphone Settings button.
4. Click the Channel Assignments button.
5. Using the drop down choices on the right, assign the desired channels
to the switch positions (see guide below) and click OK.
Recommended Channel Setting
Microphone 1
Switch Switch Switch Switch Switch Switch Switch Switch Switch Switch
Position Position Position Position Position Position Position Position Position Position
1 2 1 2 1 2 1 2 1 2
A B A B C D C D E C
Microphone 2 Microphone 3 Microphone 4
Microphone 5
*The ezRoom comes standard with 2 channels. Add 3 additional channels with the optional Channel Expansion Module.
** The Microphone Settings application is available at gofrontrow.com/guides-resources.
24
To Next Page
Loading...
