Labeling
Your Pass-Around Microphone includes a location for adding
a name or room number for easy identification.
1. Place the microphone on a stable surface with the battery
door facing up.
2. Remove the battery door using the supplied Phillips
screwdriver.
3. Slide the clear window out of the battery door.
4. Write the name of the microphone on a blank label that came
with your microphone.
5. Place the label in the battery door.
6. Slide the clear window back into the battery door.
7. Replace the battery door and tighten the screw.
20
clear window
To Next Page
Loading...
