Need help?Do you have a question about the FrSky HORUS X10S and is the answer not in the manual?
General| Model Name | HORUS X10S |
|---|---|
| Frequency | 2.4 GHz |
| Operating System | OpenTX |
| Channels | 16 |
| Operating Voltage Range | 6.0V - 8.4V |
| Operating Temperature | -10°C to +60°C |
| Internal Module | Yes |
| External Module Bay | Yes |
| Gimbals | Hall sensor gimbals |
| Knobs | 2 |
| Telemetry | Yes |
| Voice Alerts | Yes |
| Haptic Feedback | Yes |
| SD Card Slot | Yes |
| USB Port | USB-C |
| Audio Jack | 3.5mm |
| Weight | 950g |
| Modulation | ACCST D16 |
| Display | Color LCD |
| Screen Resolution | 480x272 pixels |
| Compatibility | FrSky receivers |
| RF System | ACCST |
| Battery | 2S Li-ion battery |
| Charging | USB-C |
| Switches | 6 |
| Sliders | 2 |
Information on obtaining assistance and technical support for the manual.
Notes on regional sales policies and differences in technical support.
Details on product usage, export regulations, and warranty terms.
Create, select, modify, copy, or delete aircraft models.
Adjust time, date, and date display format.
Control screen brightness and enable sleep function.
Adjust key, alarm, and trim volumes; mute options.
View transmitter battery voltage and configure low-voltage warnings.
Calibrate the endpoints of sticks, knobs, and sliders.
Reverse the signal direction of control inputs.
Guide on updating the transmitter's firmware.
Enable Bluetooth for flight data transmission to a mobile device.
Configure settings for SXR receivers, like wing type.
View hardware version, firmware version, and other details.
Introduction to the Model menu's structure and options.
Manage internal and external RF modules and receiver types.
View real-time output values for each channel.
Reverse the direction of receiver channels.
Adjust servo response time for functions like landing gear.
Set maximum travel range for servos.
Adjust the neutral position of servos.
Customize the step size of trim buttons for flight modes.
Configure failsafe behavior for loss of RF signal.
Create custom switch logic for advanced functions.
Create and manage custom curves for various functions.
Program alerts, sounds, and actions triggered by switches.
Configure telemetry sensors and customize data display.
Deactivate startup sounds, pop-ups, and warnings.
Set up warnings for incorrect switch positions at startup.
Configure wired or wireless trainer connections.
Calibrate telemetry sensor readings.
Reassign hardware inputs to desired functions.
Assign functions to available receiver channels.
Program up to nine different flight conditions for models.
Set control surface deflection rates and exponential curves.
Shut down engines or deactivate motor for safety.
Set a switch to hold a preprogrammed throttle position.
Adjust throttle response correlation to power units.
Program V-tail configurations and flight modes.
Create custom mixers beyond predefined options.
Explains symbols indicating danger, warning, caution, and notes.
Advises on safe flying practices and transmitter maintenance.
Recommends using the transmitter at certified club sites.
Guidelines for safe charging and handling of Li-ion batteries.
Lists the main hardware features of the HORUS X10/X10S.
Details compatibility with various FrSky and external RF receivers.
Describes the industrial high resolution TFT screen.
Explains the CNC milled gimbal construction with Hall Effect sensors.
Describes the programmable vibration feature for notifications.
Monitors transmitter antenna efficiency and generates alarms.
Real-time monitoring of received signal quality for warnings.
Allows channel sharing between two HORUS transmitters wirelessly.
Information on using FrSky Free Link App for telemetry data.
Illustrates the physical layout of the transmitter's controls and ports.
Details internal flash and external microSD card storage options.
Explains the use of buttons, wheel, and screen navigation elements.
Illustrates how to identify the current position within the menu structure.
Visual representation of the transmitter's menu hierarchy.
Describes quick access functions like timer reset via button presses.
Overview of monitoring connected telemetry sensor data on the screen.
Configure telemetry sensors, customize display order, and set alarms.
Details the purpose of CONFIG, IMAGES, SOUNDS, SYSTEM, FIRMWARES, LOGS folders.
Guidelines for creating custom boot images, USB icons, and model images.
Connects HORUS to PC via USB to access flash and microSD as drives.
Step-by-step instructions for upgrading transmitter firmware.
Definitions for terms starting with A and B.
Definitions for terms starting with C and D.
Definitions for terms starting with E and F.
Definitions for terms starting with G and H.
Definitions for terms starting with I and L.
Definitions for terms starting with M and O.
Definitions for terms starting with P and S.
Definitions for terms starting with T and Z.
To Next Page
